SPK® Precision Tools for Milling

The MKS 88, MKS 75 and MKS 45 Milling Cutter Series for Universal Rough Machining and Finishing

The milling cutters of this series with a setting angle of 88°, 75° or 45° are designed for rough machining and finishing in a wide range of applications.

The sturdy wedge clamping for negative inserts makes it possible to use the milling cutters even with high cutting data at feed rates up to >6,000 mm/min with process reliability.

MKS 88°/75°/45° Performance Data
Material Gray cast iron, ductile cast iron
Types of machining Milling
Cutting materials - mixed ceramics
- silicon nitride ceramics
- cermets
- coated versions
Component situation Stable Not thin-walled Not instable
Machining 3.2 Ra 6.3 Ra 12.5 Ra

Rough machining, rough finishing

Cutting data recommendations fz max = 0.16 – 0.30 mm
KSS With KSS + Without KSS

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.