SL 654 C

SL 654 C

SL 654 C is a cutting material with a multi-layer TiCN/TiN coating. It is a specialist for “fresh” gray cast iron castings and is ideal for machining components cast less than three days beforehand. With this grade tool life does not deteriorate when “fresh castings” are tuned on the lathe. Its wear resistance and hot hardness also allow for increased cutting data and higher removal rates compared to conventional varieties for machining gray cast iron. What’s more, the cutting material is equipped with IKS-PRO notch type clamping for maximum clamping security.

SL 654 C Performance Data IKS-PRO
Material Ductile cast iron, fresh cast
Types of machining External Machining/External Turning Internal Machining/Internal Turning
Cutting conditions Continuous Cut Continuous Cut Continuous Cut Interrupted Cut Interrupted Cut
Tool entry conditions Excellent Tool Entry Conditions Acceptable Tool Entry Conditions Acceptable Tool Entry Conditions Unfavorable Tool Entry Conditions
Machining 6.3 Ra 12.5 Ra

Rough machining

Cutting data recommendations vc = 500 – 1,200 m/min
f = 0.25 – 0.5 mm
ap = 2.5 – 5.0 mm
KSS With KSS + Without KSS

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.