SL 508

SL 508

SL 508 shows its strengths especially in rough machining because it is insensitive to notch wear in particular, which significantly increases production reliability. Its suitability for rough turning of “fresh castings” is particularly impressive; it is a perfect example of how high-performance machining can be done today with minimal wear characteristics. What’s more, the cutting material is equipped with IKS-PRO notch type clamping for maximum clamping security.

SL 508 Performance Data IKS-PRO
Material Gray cast iron
Types of machining External Machining/External Turning Internal Machining/Internal Turning Boring
Cutting conditions Continuous Cut Continuous Cut Continuous Cut Interrupted Cut Interrupted Cut
Tool entry conditions Excellent Tool Entry Conditions Acceptable Tool Entry Conditions Acceptable Tool Entry Conditions Unfavorable Tool Entry Conditions
Machining 12.5 Ra

Rough machining

Cutting data recommendations vc = 500 – 1,000 m/min
f = 0.35 – 1.0 mm
ap = 2.5 – 5.0 mm
KSS With KSS + Without KSS

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.