SH 2

SH 2

SH 2 is characterized by its extremely homogeneous submicron structure, which gives it increased mechanical and thermal stability. This mixed ceramic grade is specifically designed for hard-fine machining in continuous cutting. It also shows its strength in milling, especially in finishing operations, and in grooving and boring.

SH 2 Performance Data
Material Gray cast iron, ductile cast iron, hard materials, hardened steels
Types of machining External Machining/External Turning Internal Machining/Internal Turning Grooving (GBMP) Milling Boring
Cutting conditions Continuous Cut Continuous Cut Continuous Cut
Tool entry conditions Excellent Tool Entry Conditions Acceptable Tool Entry Conditions Acceptable Tool Entry Conditions
Machining 0.8 Ra 1.6 Ra

Finishing

Cutting data recommendations hard turning vc = 80 – 180 m/min
f = 0.1 – 0.3 mm
ap = 0.1 – 0.5 mm
Cutting data recommendations milling cast iron vc = 200 – 880 m/min
fz = 0.08 – 0.6 mm
ap = 0.1 – 0.5 mm
Cutting data recommendations finish turning cast iron vc = 400 – 1,200 m/min
f = 0.08 – 0.6 mm
ap = 0.5 – 1.0 mm
KSS With KSS + Without KSS

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.