LKM 880

LKM 880

Thanks to its high toughness and wear resistance, the LKM 880 enables large metal removal rates due to the considerable cutting values of a vc of up to 2000 m/min and a feed per tooth of up to 0.25 mm. The roughing and rough finishing of GJL (GG) and GJS (GGG) workpieces are carried out by the LKM 880 extremely economically and reliably. Tool life can be increased significantly when machining cast iron materials with the LKM 880 cutting material.

LKM 880 Performance Data
Material GJL (GG), GJS (GGG)
Types of machining Milling Boring
Cutting conditions Interrupted Cut
Tool entry conditions Unfavorable Tool Entry Conditions
Machining
12.5 Ra

Rough machining

6.3 Ra

Rough finishing

Cutting data recommendations milling GJL (GG) vc = 200 – 2,000 m/min
fz = 0.1 – 0.25 mm
ap = 1.0 – 5.0 mm
Cutting data recommendations milling GJS (GGG) vc = 500 – 1,000 m/min
fz = 0.14 – 0.21 mm
ap = 1.0 – 5.0 mm
KSS With KSS + Without KSS

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.