SPK® Tool Systems for Milling

Milling Tools for Face and Shoulder Milling with SPK® Cutting Materials

CeramTec continuously develops new tool systems as well as ceramic cutting materials and insert geometries for different milling operations, which are characterized by outstanding performance and are easy and safe to handle.

Milling Block

Point your mouse over a milling cutter to learn more about.
Click on the milling cutter to go to its detail page.

PPCM-SX
Fine-Finishing
PPCMSX
vc = 800 m/min
fz = 0.12 mm
ap = 0.2 mm
PFK88-SN
Roughing
PFK88SN
vc = 800 m/min
fz = 0.2 mm
ap = 3.0 mm
PDK-SN
Finishing
PDKSN
vc = 800 m/min
fz = 0.14 mm
ap = 0.3 mm
PFL45-SP
Chamfering
PFL45SP
vc = 300 m/min
fz = 0.12 mm
ap = 1.5 mm
PFK90-TN
Slotting
PFK90TN
vc = 700 m/min
fz = 0.2 mm
ap = 2.0 mm
BFL-SX
Helical Interpolation
BFLSX
Vf = 12500 mm/min
0.5 mm Zustellung
pro Helix
PFL43-OE
Counter Milling
PFL43OE
vc = 700 m/min
fz = 0.2 mm
ap = 3.0 mm
BFL-SX
Side Punging
BFLSX
Vf = 11200 mm/min

Select the appropriate SPK® tooling systems for your milling applications from the table below.

Click on a milling application on the right to see the corresponding SPK® tooling systems.

Grafik
Grafik
Grafik
Grafik
Grafik
Grafik
Grafik
Grafik
Type Component Stability Surface Quality Milling Cutter

PFKSRN
for Rough Milling

6.3
Fräser PFKS RN-AM

PFK90TN
for 90° Shoulder Millling

12.5
6.3
Fräser PFK 90R-AM

PFK88SN

12.5
6.3
Fräser PFK 88R-AM

PFK75SN

12.5
6.3
Fräser PFK 75R-AM

PFK45SN

12.5
6.3
Fräser PFK 45R-AM

PFK47HD

12.5
6.3
Fräser PFK 47R-AM

PFK47HN

12.5
6.3
Fräser PFK 47R-AM

PFL88SP

12.5
6.3
Fräser PFL SP13/88°

PFL75SP

12.5
6.3
Fräser PFL SP13/75°

PFL45SP

12.5
6.3
Fräser PFL SP13/45°

PFL43OP

12.5
6.3
Fräser PFL OP-06

PFL43OE

12.5
6.3
Fräser PFL OE-06

PFL43ON

12.5
6.3
Fräser PFL ON-06

BFLSX

12.5
6.3
Fräser BFL SP13/75°

PMKSN

6.3
3.2
0.8
Fräser PMK 88R-AM

PMKSSN

6.3
3.2
0.8
Fräser PMKS 88R-AM

PDKSN

3.2
0.5
Fräser PDK 88R-AM

PEKSN

6.3
3.2
0.8
Fräser PEK 88R-AM

PPCSP

3.2
0.8
Fräser PPC(M) 88R-AM

PPCMSX

3.2
0.5
Fräser PPC(M) 88R-AM

PMCOP

3.2
1.6
Fräser PMC-OP

PMCMOP

3.2
0.8
Fräser PMCM-OP

MFSSN

6.3
3.2
0.8
Fräser MFS 88-M4

PFKRN

6.3
Fräser PFK RN-AM

PFKSRN
for HRSA

6.3
Fräser PFKS RN-AM

PFK90TN
for Groove Milling

12.5
6.3
Fräser PFK 90R-AM

SPK® Whitepaper: “Milling Cast Iron Materials with Ceramic, PcBN
and Cermet Cutting Materials”

SPK® Whitepaper „Fräsen von Gusseisenwerkstoffen mit Keramik, PcBN und Cermet Schneidstoffen“

Milling with ceramic cutting materials, CBN and Cermet has been one of the well-engineered machining technologies for many years. Modern ceramic cutting materials and HPC milling cutters are today able to offer maximum performance and process reliability. However, practical use shows that milling with carbide inserts remains the primary field of application and is often the reason why many users forgot essential technical and economic benefits in spite of all these systems have to offer. The SPK® Whitepaper “Milling Cast Iron Materials with Ceramic, CBN and Cermet Cutting Materials” deals with this topic and details the best methods of face milling cast iron components together with the right milling cutter using Ceramic, CBN and Cermet inserts. It covers subjects such as milling different cast iron materials (CGI, ADI, etc.), cutting parameters for ceramic cutting materials, CBN and Cermet and the milling application method in detail.

The SPK® Whitepaper “Milling Cast Iron Materials with Ceramic, CBN and Cermet Cutting Materials” is available in digital format as a PDF file for downloading. If you are interested in receiving a copy, please visit this request page and complete the form there. Once you have registered, you will receive an email with a link to your download.

Milling with SPK® ceramic cutting materials offers outstanding potential in productivity and cost-cutting at high process reliability. According to the machining requirements and the workpiece situation, SPK® provides milling systems with negative or positive insert geometries – either with wedge or screw clamping. Milling systems with height adjustable insert seats have a particularly wide application range. Thereby a large number of fast and precise face milling tasks can be performed. SPK® milling tools can be equipped with different coated and uncoated inserts depending on the task at hand.

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.