Proceedings of the 10th BIOLOX® Symposium 2005
(10thSymp.pdf/65 KB)
J. Black
Keynote Address: Bearing Surfaces – 2005
(10thSymp.pdf/65 KB)
1. New Developments in the Basic Science of Ceramics and other Alternative Bearings
I. C. CLarke, G. Pezzotti, D. D. Green, H. Shirasu and T. Donaldson
Severe Simulation Test for run-in wear of allalumina compared to alumina composite THR
(10thSymp-1-1.pdf/248 KB)
J. Fisher, A. Galvin, J. Tipper, T. Stewart, M. Stone and E. Ingham
Comparison of the Functional Biological Activity and Osteolytic Potential of Ceramic on Ceramic and Cross Linked Polyethylene Bearings in the Hip
(10thSymp-1-2.pdf/32 KB)
P. Thomas and B. Summer
Allergic reactions to metal implants: Influence of wear debris
(10thSymp-1-3.pdf/222 KB)
C. H. Lohmann
Can Metal-Metal Total Hip Arthroplasty induce Hypersensitivity reactions?
(10thSymp-1-4.pdf/38 KB)
K. Knahr, L. Karamat and O. Pinggera
Blood Analysis for Trace Metals in Patients with Different Bearings in Total Hip Arthroplasty
(10thSymp-1-5.pdf/138 KB)
2. Alternative Wear Couples
S. J. MacDonald
Metal-on-Metal Total Hip Arthroplasty: The Concerns
(10thSymp-2-1.pdf/14 KB)
J. M. Martell, J. J. Verner and S. J. Incavo
Clinical Performance of a Highly Crosslinked Polyethylene at Four to Five Years in Total Hip Arthroplasty: A Randomized Prospective Trial
(10thSymp-2-2.pdf/18 KB)
T. Donaldson, A. Massihi, J. G. Bowsher and I. C. Clarke
Co-Cr Head Roughness and its Effect on Wear of UHMWPE and XLPE Cups
(10thSymp-2-3.pdf/134 KB)
C. S. Ranawat, V. J. Rasquinha and J. A. Rodriguez
Polyethylene wear in Total Hip Arthroplasty - matched pair analysis of ceramic and metal heads
(10thSymp-2-4.pdf/16 KB)
J.-Y. Lazennec, L. M. Jennings, J. Fisher and B. Masson
Two Ceramic Bearing Surfaces with a Self Adjusting Cup: A New Application of Delta Ceramics to reduce the Risk of Dislocation and Subluxation
(10thSymp-2-5.pdf/109 KB)
I. C. Clarke, D. D. Green, G. Pezzotti and D. Donaldson
Years Experience of Zirconia Total Hip Replacements
(10thSymp-2-6.pdf/92 KB)
M. Kuntz, N. Schneider and R. Heros
Controlled Zirconia Phase Transformation in BIOLOX® delta – a Feature of Safety
(10thSymp-2-7.pdf/247 KB)
3. Clinical Results of Ceramic on Ceramic Systems
W. N. Capello, J. A. D’Antonio, J. R. Feinberg and M. T. Manley
Alternative Bearing Surfaces: Alumina Ceramic Bearings for Total Hip Arthroplasty
(10thSymp-3-1.pdf/191 KB)
J. P. Garino
Ceramic-on-Ceramic Total Hip Arthroplasty: The USA Experience
(10thSymp-3-2.pdf/132 KB)
B. S. Bal, T. J. Aleto, J. P. Garino, A. Toni and K. J. Hendricks
Ceramic-on-Ceramic versus Ceramic-on-Polyethylene Bearings in Total Hip Arthroplasty:
Results of a Multicenter Prospective Randomized Study and Update of Modern Ceramic Total Hip Trials in the USA
(10thSymp-3-3.pdf/51 KB)
A. Toni and F. Traina
European Experience with Ceramic Systems
(10thSymp-3-4.pdf/33 KB)
W. K. Walter
Australian Experience with Ceramic Systems
(10thSymp-3-5.pdf/26 KB)
4. The Ceramic Option: Indications, Contraindications, Revision and Surgical Challenges
S. B. Murphy and M. Tannast
Evolution of Total Hip Arthroplasty:
Computer-Assisted, Minimally Invasive Techniques Combined with Alumina Ceramic-Ceramic Bearings
(10thSymp-4-1.pdf/766 KB)
J. A. D’Antonio
Acetabular Positioning to Maximize Range of Motion
(10thSymp-4-2.pdf/23 KB)
W. J. Hozack
Acetabular Positioning without Navigation – Anterior Approach
(10thSymp-4-3.pdf/25 KB)
K.-H. Widmer
”Stem first”: A simplified method for optimized positioning of components in Total Hip Arthroplasty
(10thSymp-4-4.pdf/120 KB)
J. P. Garino
Revision Surgery utilizing Ceramic Bearings
(10thSymp-4-5.pdf/59 KB)
B. S. Bal, M. N. Rahaman, T. Aleto, F. S. Miller, F. Traina and A. Toni
Surface Changes to Alumina Femoral Heads after Metal Staining during Implantation, and after Recurrent Dislocations of the Prosthetic Hip
(10thSymp-4-6.pdf/214 KB)
5. Reliability of Alumina Ceramics: Myths and Reality
J. P. Garino
Ceramic Component Fracture: Trends and Recommendations with Modern Components based on improved Reporting Methods
(10thSymp-5-1.pdf/115 KB)
M. Dietrich
Ceramic Manufacturing Overview
(10thSymp-5-2.pdf/170 KB)
R. Lenk
State of the Art in Ceramic Manufacturing
(10thSymp-5-3.pdf/40 KB)
6. New Applications for Ceramics
B. S. Bal, D. D. Greenberg and T. J. Aleto
Primary Total Knee Replacement with a Zirconia Ceramic Femoral Component
(10thSymp-6-1.pdf/115 KB)
M. Manley and K. Sutton
Alternative Bearing Surfaces
(10thSymp-6-2.pdf/170 KB)
J. Fisher, P. Firkins, J. L. Tipper, R. Farrar and E. Ingham
Wear of a Novel Ceramic on Metal Bearings for Hip Prosthesis
(10thSymp-6-3.pdf/40 KB)
M.Kuntz
Future Ceramic Strategies
(10thSymp-6-4.pdf/40 KB)
N. Kitamura, R. H. Hopper, S. B. Leung, C. A. Engh, Jr. and Ch. A. Engh
Keynote Address: The Relationship between Acetabular Osteolytic Lesion Volume and Polyethylene Wear in Cementless Total Hip Arthroplasty
(10thSymp-keynote-kitamura.pdf/47 KB)


