Electrical and Optical Ceramaseal® Components

Vacuum-tight, hermetically sealed ceramic-to-metal, glass-to-ceramic and glass-to-metal Components

Electrical and optical Ceramaseal® components with ceramic parts such as electrical feedthroughs, NPT feedthroughs, coaxial connectors, isolators, multi-pin connectors, viewports, thermocouples, terminals, and accessories are just some of the specialties of the CeramTec experts in North America.

Feedthroughs
Feedthroughs
NPT Feedthroughs
NPT Feedthroughs
Coaxial Connectors
Coaxial Connectors
Isolators
Isolators
Multipin Connectors
Multipin Connectors

Ceramaseal® Online Store

Visit the online store for vacuum-sealed ceramic-metal and glass-ceramic composites
at CeramTec North America

To the Ceramaseal® Store

Worth knowing:

Ceramaseal® Areas of Application

  • Aggressive chemical substances
  • Cryogenic applications
  • High-pressure applications
  • High temperature applications
  • High voltage
  • Nuclear technology
  • Aerospace
  • Microwave technology
  • Sensors
  • Fusion applications
  • High-energy physics
  • Lasers
  • Medical technology
  • Ultra-high vacuum environments (UHV)
  • Particle accelerators
  • Super conductivity technology
  • Semiconductor technology

Ceramaseal® ceramic-to-metal and glass-to-ceramic components and assemblies are ideally suited to support optical, gas, liquid, power, instrumentation, and sensing applications. CeramTec North America pioneered the science of Ceramaseal® ceramic-to-metal sealing more than 60 years ago and is still the world leader in ceramic-to-metal sealing technology today.

Ceramaseal® – Hermetically Sealed to endure Cold, Heat or High Pressure

Hermetic, vacuum-sealed Ceramaseal® products Hermetic, vacuum-sealed Ceramaseal® products are built to endure extreme conditions. They stand up to ultra-high vacuum (UHV) environments, temperatures ranging from -269°C to 450°C, pressures in excess of 1,700 bar, corrosive or caustic environments, while maintaining an unsurpassed level of reliability and performance – Ceramaseal® products are known around the globe for their reliability. For ceramic-to-metal and glass-to-ceramic components and glass sealing technology CeramTec offers both standard and custom designs for use in vacuum, ultra-high vacuum, high-pressure, cryogenic and high-temperature applications.

Vacuum-tight Seals
100% Helium Leak Tested

Helium Leak Test Ceramaseal® products from CeramTec undergo a 100% helium leak test on a dry leak detector to 1x10-9 atm cc/s He. Products can be tested to 1x10-10 atm cc/s on request. The vacuum-sealed ceramic-to-metal and glass-to-ceramic components are designed for cryogenic applications and can withstand temperatures of up to 450°C with a leak rate of under 1x10-9 atm cc/s Helium; they are also suitable for use with currents of over 1,000 A and voltages exceeding 100 kV.

Worth knowing:

Benefits of Advanced Ceramics Hermetic Solutions

  • Hermeticity for vacuum applications
  • Excellent chemical resistance
  • Excellent electrical properties
  • High temperature resistance
  • Excellent mechanical strength
  • Low particulate generation
  • High purity
  • Superior thermal conductivity (especially for a ceramic)
  • Thermal conductivity with electric resistance
  • Dimensional stability
  • Pushing the limits of power density
  • Lower junction temperatures for power semiconductors
  • High reliability/MTBF (mean time between failures)
  • Close tolerances
  • Outstanding solderability
  • Superior adhesion of metals

Research, Design, Manufacturing and Testing all
under one Roof

CeramTec company grounds in Laurens SC, USA

Research, design, manufacturing and testing for all Ceramaseal® components take place at CeramTec’s own facility in Laurens, South Carolina. CeramTec is the only North American supplier to offer the complete manufacture of advanced ceramics and sealing products under one roof. This ensures comprehensive technical control over the entire manufacturing process, from the start of production to the final product. New processes and materials are always undergoing testing at CeramTec in Laurens, where we also develop new processes and technologies to address the rapidly changing demands placed on ceramic-to-metal and glass-to-ceramic seals along with the challenges involved in sensor technology and OEM market requests.

Recommended Contacts

Please click on the button “Contacts” to the right, to get a list with the personal and direct responsible contacts within the CeramTec Group.